When decorating a new house, many people will choose to install broken bridge aluminum doors and windows, because they have the characteristics of heat insulation, durability, and beauty, and are welcomed by many consumers. So how to judge the quality of broken bridge aluminum doors and windows?

一、How to judge the quality of broken bridge aluminum doors and windows?

1. You can see the appearance of broken bridge aluminum doors and windows. Good broken bridge aluminum doors and windows have fine workmanship and good gloss. Bad broken bridge aluminum doors and windows are not full in color and uneven in tangent.

2. Look at the hardware of broken bridge aluminum doors and windows. The hardware of good quality broken bridge aluminum doors and windows has no particles and the coating is relatively uniform. The hardware of poor quality is rough in workmanship and has impurities.

二、broken bridge aluminum doors and windows maintenance skills

1. Open and close doors and windows gently

Do not use too much force when opening and closing the doors and windows. Do not use too much force to cause damage to the doors and windows. The action should be gentle. It is best to install an anti-collision device. If the switch is not smooth, you can check whether the track parts are deformed or something is stuck. Push and pull with brute force, otherwise it is easy to cause problems such as frame deformation.

2. Inspection and maintenance of hardware

The hardware of broken bridge aluminum doors and windows is very important. The hardware of broken bridge aluminum doors and windows should be overhauled every once in a while. If there is any problem, it should be repaired or replaced in time. In addition, the sealing tops of the aluminum doors and windows of the broken bridge can ensure the sealing of the doors and windows. If there is any drop, it must be repaired in time.

3. Clean the grooves and slide rails of aluminum doors and windows on broken bridges

To maintain the broken bridge aluminum doors and windows, pay attention to the cleaning of the door frame. For the sand, dust and other stains on the door frame, it is necessary to clean them in time, otherwise it is easy to cause the broken bridge aluminum doors and windows to not open and close smoothly, and even cause damage to the door and window hardware in serious cases. The service life of broken bridge aluminum doors and windows.

4. Do not use strong acid and alkali cleaners when wiping doors and windows

When maintaining and cleaning aluminum doors and windows with broken bridges, do not use strong acid-base cleaners, which will corrode the surface of aluminum doors and windows with broken bridges. It is best to choose a neutral detergent. After cleaning, scrub with soft gauze , so that the surface can be clean and tidy.

Baydee summary: This is the end of the introduction on how to judge the quality of broken bridge aluminum doors and windows. After reading it, I hope it will be helpful to everyone. If you want to know more about it, you can pay attention to Baydee.