How to remove the glass glue on the door after the doors and windows are installed?

Glass glue is a very inconspicuous auxiliary material in decorative materials, but it plays a very important role in decoration. Sometimes we find that there is a lot of glass glue on the door and window frame after the doors and windows are installed. How to remove this glass glue?

Baydee uPVC Profile to teach you:

Wipe the alcohol, which can wipe off the traces of the adhesive tape, smear alcohol on a cloth, and then wipe hard against the traces, and you can remove it.

Erase it with an eraser, and use the 4b eraser for drawing several times, you can see that the eraser turns black, and the tape marks on it are removed.

Blow it with a hair dryer, blow the place with the tape marks against the hair dryer, and then gently scrape it.

Nail polish remover has a softening effect, and it can be removed by wiping with a cotton swab dipped in nail polish remover.

Repeated sticking and tearing with sticky transparent glue can also remove surface dirt.

Apply the face oil on it, spread it evenly, use your fingernails to pull it off first, and then wipe it off with a damp towel.

Wipe with a paper towel dampened with acetone. It quickly and easily removes residual gum, better than alcohol. Both of the above are solvents, and they are also the best of all methods.

Use hand cream, squeeze some hand cream on top of the glue residue, and then slowly rub it with your thumb, rubbing for a while to remove the glue residue sticking to the door and window frame.

Use banana water, which is sold wherever paint is sold, and the method is the same as alcohol acetone.

Use soap to add a little ammonia and turpentine mixture to remove dirt.

Wipe with essential oil.

Wipe off with a special cleaner or sneaker cream.

If the traces that have been left for a long time have hardened, you can use a hot towel to soften it before wiping.

Soak it in water, put a little dishwashing liquid, and brush it with an old toothbrush.

Tips for cleaning glass

Ink Smudges: Wipe off with turpentine.

Grease stains: Wipe with acetic acid solution and degreasing detergent and water.

Tape Smudges: Scrape off the tape with a knife, then wipe with turpentine.

Pencil smudges: Can be wiped off with turpentine.

Crayon smudges: Wipe off with a dry cloth dipped in turpentine.

Colored pencil smudges: You can wipe carefully with an eraser first. If it can't be wiped off, it can be scrubbed with washing powder.

How to clean the dirt on aluminum alloy

If the dirt on the aluminum alloy is only black stains, you can use "safe bleach" water to wipe it with cotton gauze, and it will be clean after ten minutes. If the home is near the sea, there will be more white spots, which is caused by corrosion. It is better to use a relatively fine water sandpaper to grind, then the corrosion white spots can be removed, and then apply a layer of transparent "smart frame". The following lists some household cleaning methods of aluminum alloy dirt:

Washing with cola, aluminum alloy windows and toilets at home can be washed with cola, and the stain removal effect is better.

Cleaning with aluminum alloy degreasing cleaning solution: because alkaline solution has a strong corrosive effect on aluminum alloy, and the cost of organic solvent is high, when many aluminum alloy parts need to be processed and cleaned, aluminum alloy cleaning solution can be configured for cleaning.

Dip a cloth with gasoline and wipe it, but be quick, otherwise the gasoline will evaporate quickly. Be careful that gasoline is a dangerous item and should not be close to the fire source.

If it is a pot, as long as it does not use an acidic detergent, it can be cleaned with an alkaline cleaning product.

How to remove the sticky glue on the aluminum alloy? It is not difficult to remove the sticky glue on the aluminum alloy, and there are many methods. If there is no way to remove it by one method, try other methods. There is always one that can be removed. How to clean the dirt on the aluminum alloy? It is not difficult to clean the dirt on the aluminum alloy, but you must not rinse it directly with water, which will affect the service life of the aluminum alloy. Pay attention to Baydee uPVC Profile to share different door and window knowledge with you.