The sealing strip of the sliding window can be dustproof and waterproof. When installing the sliding window, people will use the sealing strip to seal, so how to install the sliding window sealing strip? What should I do if the sliding window seal has an odor? Today, Baydee Upvc Profiles will answer them one by one for you.

How to install the sliding window sealing strip

1. The rubber sealing strip should not be pulled too tightly during installation. It should be inlaid in place to keep the surface straight and in close contact with the glass and the glass notch, and the periphery of the glass should be uniformly stressed. Then cut off the rubber strip from the bevel at the corner position, and inject glue into the cut place to make it stick firmly.

2. The sealing strip of plastic-steel sliding window can use sealing strips of various materials. When installing the sealing strip of the plastic-steel sliding window, because the rubber strip is an elastic body, it may shrink after being rolled. The correct way is to retract the two ends of the rubber strip towards the base when the rubber strip device reaches the interface of the two ends, leaving a shortening margin of 2-3 cm, and then cut and insert it.

3. When installing the sealing strip of the top, the top is generally installed on the window sash, frame sash, etc., so that the sealing between the frame and the window sash is better.

4. It can be fixed with sealant when pasting, so that the gap is very firm, and then the glass can be injected with a sealing strip to leave a gap. Generally speaking, the thickness of the injected glue should not be less than 5 mm, and Make sure that the glass cannot be shaken before the glue solidifies, so that the sealing strip is installed in place.

What should I do if the sliding window seal has a peculiar smell?

The sealing strip of the sliding window has a peculiar smell, which may be due to the purchase of inferior sealing strips. It is difficult to remove the peculiar smell of the sealing strip of the sliding window. It is recommended to purchase the sealing strip of the regular manufacturer when purchasing. The high-quality sealing strip generally has no peculiar smell. When purchasing sliding window seals, you should smell the smell. Generally speaking, the door and window seals have no smell. Secondly, take a look at the appearance, the appearance of the door and window sealing strip is bright and smooth, the section color of the sealing strip is similar, and the filler is less.

If the sealing strip of the sliding window is a rubber sealing strip, it cannot be tightened during installation. The sliding window sealing strip has peculiar smell. It is recommended to purchase the sealing strip for installation.